Water Purification
Water Purification
Devices, filters, cartridges, accessories, and other supplies for use in the purification of water. Products include consumables and replacement parts for use with a variety of water purification systems.
Source or feed water may be tap water, water that is pre-treated by the system, or pretreated water that is drawn from a reservoir or tank. Water systems typically produce water rated as Type I, II, III, or IV.
Type I or ultrapure Type I water is defined by resistivity and TOC levels (total organic compounds, measured in parts per billion (ppb). Type I water is required for ICPMS, AAS, FAAS, GFAAS, HPLC, IC, and ICPAES methods, molecular biology, cell and tissue culture, electrochemistry, and electrophoresis.
Type II water is suitable for ELISA and RIA test methods, buffer and reagent preparation, and spectrophotometry. It also has a specific requirement for resistivity. Type III water is used for media preparation, glassware washing and rinsing, and other non-critical applications. Type IV water is typically used as feed water for Type I and Type II water purification systems.
Replacement water purification parts – filters and cartridges – are key components of these systems and must be changed according to specifications to maintain the promised water quality.
Filtered Search Results
Thermo Scientific™ Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Sterile filter for use with Barnstead™ water purification systems; can be autoclaved up to 5 times.
Thermo Scientific™ Barnstead™ GenPure™
Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with this water purification system.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055μS/cm |
Particles >0.2µM/mL | <1 |
Feedwater Source | Pretreated |
Width (Metric) | 372 mm |
Flow Rate | Up to 2 L/min. |
Type | Water System |
Feedwater Connector | R 3/4 in. |
Depth (Metric) | 330 mm |
Product Water Type | Type 1 |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System
Process up to 15L/day of ultra-pure water with the compact Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System, which reliably performs applications such as HPLC.
Operating Pressure | 0.1 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 545 mm |
Electrical Requirements | 100/240 V 50/60 Hz |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055μS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Pretreated |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 305 mm |
Type | Water Purification System |
Feedwater Connector | R 3/4 in. |
Product Water Type | Type 1 |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.06 kW |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ Pacific™ RO Water Purification System
Improve functional and economical production of high-purity water with this modularly designed laboratory reverse osmosis system.
Operating Pressure | 1.5 to 6 bar |
---|---|
Height (Metric) | 603 mm |
Electrical Requirements | 230 V 50/60 Hz |
Net Weight (Metric) | 21 kg |
Width (Metric) | 372 mm |
Type | Reverse Osmosis Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 330 mm |
Voltage | 230 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Bacterial retention | 99% |
Feed Water Monitoring | Integrated |
Thermo Scientific™ Barnstead™ TII Type 2 Water System
This item is no longer available and has been replaced by the next generation of Barnstead Water Purification Systems.
Feedwater Pressure | 30 to 100 psig (2 to 6.9 bar) |
---|---|
Height (Metric) | 49.5 cm |
Electrical Requirements | 100/240 VAC 50/60 Hz |
Depth (English) | 18.5 in. |
Width (English) | 13.5 in. |
RO Flow Rate | 12 L/hr. |
Resistivity | 15 Mohm.cm at 25°C |
Conductivity | 0.067 to 0.1 µS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 34.3 cm |
Total Organic Carbon | 1 to 5 ppb |
Type | Water System |
Depth (Metric) | 47 cm |
Product Water Type | Type 2 |
Voltage | 100/240 VAC |
Purified Water Flowrate Field | 1 L/min. |
Frequency | 50/60 Hz |
Feedwater Temperature (Metric) | 4°C to 40°C |
Certifications/Compliance | CE, CSA |
Bacterial Content | <1 CFU/mL |
Bacterial retention | 99% |
Height (English) | 19.5 in. |
Feed Water Monitoring | No |
Thermo Scientific™ Double Softening System WMS
Monitor total water processed using the electronic volume control featured in this double softening system.
Type | Water Softening System, WMS |
---|
Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System
Convert tap water to ASTM Type 1 water with this compact, all-in-one water system.
Operating Pressure | 1 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 545 mm |
Electrical Requirements | 100/240 V 50/60 Hz |
Net Weight (Metric) | 22 kg |
Particles >0.2µM/mL | <1 |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 305 mm |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 400 mm |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Power Consumption | 0.06 kW |
Bacterial Content | <0.01 CFU/mL |
Bacterial retention | 99% |
Feed Water Monitoring | No |
Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems
Produce Type 1 ultrapure water with low operating costs using the Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification system.
Feedwater Pressure | 100 psig (6.9 bar) |
---|---|
Height (Metric) | 71.1 cm |
Length (Metric) | 19 cm |
Resistivity | 18.2 Mohm.cm at 25°C |
Length (English) | 7.5 in. |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Tap or Pretreated |
TOC Monitor with UV Intensity Monitoring | No |
Total Organic Carbon | <10 ppb |
Flow Rate | Up to 2.5 L/min. |
Type | Water Purification System |
Product Water Type | Type 1 |
Certifications/Compliance | CE, CSA |
Remote Dispenser | Optional |
Bacterial Content | <1 CFU/mL |
Height (English) | 28 in. |
Feed Water Monitoring | No |
Thermo Scientific™ Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with this automatic and cost-efficient TII water purification system.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 613 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Net Weight (Metric) | 25 kg |
Resistivity | 10 to 1 Mohm.cm at 25°C |
Conductivity | 0.1 to 1.0μS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Daily Output | 20 to 200 L |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 372 mm |
Total Organic Carbon | <30 ppb |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Product Water Type | Type 2 |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Bacterial Content | 99% |
Bacterial retention | 99% |
Feed Water Monitoring | No |
Fisher Scientific™ Accu500 Water System
Exceeds ASTM, CLSI, CAP, and ISO Type I water standards. Fisher Scientific™ Accu500 Water System is a versatile purification system that can be used in a number of ways.
Feedwater Pressure | 1 to 6 bar |
---|---|
Height (Metric) | 48 cm |
Length (Metric) | 30 cm |
Depth (Metric) | 51 cm |
Resistivity | 18.2 Mohm.cm |
Product Water Type | Tap Water |
Purified Water Flowrate Field | 1.5 L/min. |
Model | Accu500 |
Particles >0.2µM/mL | <1/mL with 0.2μm final filter or terminal ultrafiltration cartridge |
Endotoxin Concentration | <0.001 EU/mL with a terminal ultrafiltration cartridge |
Temperature Range (Metric) | 5°C to 45°C |
Fisherbrand™ ACCU500 UV Water Purification System
Produces ultrapure and reverse osmosis water from tap water directly with no additional pre-treatment filters.
Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Simultaneously dispense Type 1 ultrapure water from up to three dispensers using this water purification system.
Operating Pressure | 0.1 to 6 bar |
---|---|
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Depth (English) | 13 in. |
Width (English) | 14.6 in. |
Resistivity | 18.2 Mohm.cm at 25°C |
Conductivity | 0.055µS/cm |
Particles >0.2µM/mL | <1 |
TOC Monitor with UV Intensity Monitoring | Yes |
Width (Metric) | 372 mm |
Flow Rate | Up to 2 L/min. |
Type | Water Purification System |
Feedwater Connector | 3/4 in. |
Depth (Metric) | 330 mm |
Product Water Type | Type 1 |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Remote Dispenser | Yes |
Height (English) | 24 in. |
Feed Water Monitoring | Integrated |
Thermo Scientific™ Barnstead™ GenPure™ UV/UF with installation
Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with the Thermo Scientific™ Barnstead™ GenPure™ system.
Thermo Scientific™ Aquanex™ Ultrapure Tap to Type I/II Water Purification System with Touch Smart Dispenser
Count on the Thermo Scientific™ Aquanex™ Ultrapure Water Purification System for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment