Water Purification Devices
Water Purification Devices
Devices, filters, cartridges, accessories, and other supplies for use in the purification of water.
Water purification systems provide consistent and pure sources of water that meet NCCLS, ASTM, and CAP specifications. Laboratory water purification systems range from simple filtration to more extensive treatment techniques, including:
- Distillation
- Ion exchange, also called deionization or demineralization
- Ultrafiltration and microporous filtration
- Reverse osmosis
- Ultraviolet (UV) radiation
Water purification systems also range in size based on capacity. Some units are small enough to fit on a benchtop; others are free-standing or wall-mounted and may have multiple, remote reservoirs for convenience.
Filtered Search Results
Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System
Produce Type 1 ultrapure water while conserving space with the compact and flexible Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System.
Operating Pressure | 2 to 6 bar |
---|---|
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Depth (English) | 18.6 in. |
Width (English) | 13 in. |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055µS/cm |
Particles >0.2µM/mL | <1 |
TOC Monitor with UV Intensity Monitoring | Yes |
Width (Metric) | 330 mm |
Flow Rate | Up to 2 L/min. |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 472 mm |
Product Water Type | Type 1 |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Height (English) | 24.2 in. |
Feed Water Monitoring | Integrated |
Thermo Scientific™ Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Sterile filter for use with Barnstead™ water purification systems; can be autoclaved up to 5 times.
Thermo Scientific™ Barnstead™ RO System
This product has been discontinued. For additional information or alternate products please contact your sales representative.
Contaminant Rejection (Organic) | 99% |
---|---|
Contaminant Rejection (Particulate) | 90 to 95% |
Width (English) | 13.5 in. |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Tap |
Contaminant Rejection (Microbiological) | 99% |
Width (Metric) | 34.3 cm |
Silica | <30ppm |
Product Water Type | Ultrapure (Type 1) |
Voltage | 100/240 VAC |
Turbidity | <1.0 NTU |
pH | Optimum Range: 6.5 to 7.5, Operating Range: 4 to 11 |
Certifications/Compliance | CE, CSA |
Height (English) | 19.5 in. |
Feedwater Pressure | 30 to 100 psig (2 to 6.9 bar) |
Height (Metric) | 49.5 cm |
Max. TDS as CaCO3 | 800 ppm |
Iron Total as Fe | <0.5ppm |
Electrical Requirements | 100/240 VAC 50/60 Hz |
Chlorine Tolerance | 1000 ppm/hr. |
Depth (English) | 16.9 in. |
Resistivity | 18.2MΩ·cm |
TOC Monitor with UV Intensity Monitoring | No |
Type | Reverse Osmosis System |
Contaminant Rejection (Minimum Ionic) | Monovalent: 90 to 95%; Polyvalent: 95 to 99 |
Silt Density Index | <5% |
Depth (Metric) | 42.9 cm |
Frequency | 50/60 Hz |
Temperature Range (English) | 34°F to 95°F |
Temperature Range (Metric) | 1°C to 35°C |
Bacterial Content | 99% |
Feed Water Monitoring | No |
Thermo Scientific™ Accessories for the Barnstead™ TII Type 2 Water System
Integrate the accessories for the Thermo Scientific™ Barnstear™ TII Type 2 Water System with the system itself for a more complete laboratory solution.
Feedwater Pressure | 30 to 100 psig (2 to 6.9 bar) |
---|---|
Height (Metric) | 49.5 cm |
Electrical Requirements | 100/240 VAC 50/60 Hz |
Depth (English) | 18.5 in. |
Width (English) | 13.5 in. |
RO Flow Rate | 12 L/hr. |
Resistivity | 15 Mohm.cm at 25°C |
Conductivity | 0.067 to 0.1 µS/cm |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 34.3 cm |
Total Organic Carbon | 1 to 5 ppb |
For Use With (Equipment) | Barnstead™ TII Type 2 Water System |
Depth (Metric) | 47 cm |
Product Water Type | Type 2 |
Voltage | 100/240 VAC |
Purified Water Flowrate Field | 1 L/min. |
Frequency | 50/60 Hz |
Feedwater Temperature (Metric) | 4°C to 40°C |
Bacterial Content | <1 CFU/mL |
Height (English) | 19.5 in. |
Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System
Convert tap water into high-purity water with the Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System, a complete solution integrating purification and tank.
Operating Pressure | 2 to 6 bar |
---|---|
Height (Metric) | 1500 mm |
Net Weight (Metric) | 66 kg |
Resistivity | 10 to 1 Mohm.cm |
Conductivity | 0.1 to 1.0μS/cm |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 450 mm |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 580 mm |
Product Water Type | Type 2 |
Temperature Range (Metric) | 2°C to 35°C |
Bacterial retention | 99% |
Feed Water Monitoring | No |
Fisher Scientific™ Accu100 Ultrapure Water System
Ultrapure water for critical laboratory applications. Fisherbrand™ Accu100 Ultrapure Water System used to produce Type I ultrapure water from RO, distilled or deionized water.
Particle Size | <1/mL |
---|---|
Height (Metric) | 44 cm |
Flow Rate | 1.0 to 1.5 L/min. at 25°C |
Length (Metric) | 21 cm |
Depth (Metric) | 35 cm |
Resistivity | 18.2 Mohm.cm at 25°C |
Length (English) | 8.26 in. |
Model | Accu100 |
Feedwater Source | Distilled, DI, RO, EDI |
Temperature Range (Metric) | 5°C to 45°C |
Bacterial Content | <0.1 CFU/mL |
Height (English) | 17.3 in. |
Fisherbrand™ Accu20 Ultrapure Water System
Fisherbrand™ Accu20 Ultrapure Water System used to produce Type I ultrapure water and RO water on demand from tap water directly.
Feedwater Pressure | 15 to 90 psi (1 to 6 bar ) |
---|---|
Height (Metric) | 48 cm |
Flow Rate | RO water (at 25°C ): >0.5L/min.; Ultrapure water ( Type I ) (at 25°C ): >0.5L/min. |
Depth (English) | 20 in. |
Length (Metric) | 30 cm |
Depth (Metric) | 51 cm |
Resistivity | 18.2 Mohm.cm |
Length (English) | 76.2 in. |
Model | Accu20 |
Conductivity | RO water at 25°C: Typically <20μS/cm |
Temperature Range (Metric) | 5°C to 45°C |
Height (English) | 18.8 in. |
Fisherbrand™ ACCU500 Water Purification System
Produces ultrapure and reverse osmosis water from tap water directly with no additional pre-treatment filters.
Thermo Scientific™ Barnstead™ GenPure™ xCAD Water Purification System
This item is no longer available. The recommended replacement is Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055 µS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Pretreated |
Width (Metric) | 372 mm |
Flow Rate | Up to 2 L/min. |
Type | Water Purification System |
Feedwater Connector | R 3/4 in. |
Depth (Metric) | 330 mm |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Remote Dispenser | Yes |
Bacterial Content | <1 CFU/mL |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ Classic Stills
Remove inorganic solids, organics, bacteria and pyrogens from your water with Thermo Scientific™ Barnstead™ Classic Stills.
Frequency | 50/60 Hz |
---|---|
Certifications/Compliance | UL, cUL |
Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System
Process up to 15L/day of ultra-pure water with the compact Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System, which reliably performs applications such as HPLC.
Operating Pressure | 0.1 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 545 mm |
Electrical Requirements | 100/240 V 50/60 Hz |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055μS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Pretreated |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 305 mm |
Type | Water Purification System |
Feedwater Connector | R 3/4 in. |
Product Water Type | Type 1 |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.06 kW |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ Pacific™ RO Water Purification System
Improve functional and economical production of high-purity water with this modularly designed laboratory reverse osmosis system.
Operating Pressure | 1.5 to 6 bar |
---|---|
Height (Metric) | 603 mm |
Electrical Requirements | 230 V 50/60 Hz |
Net Weight (Metric) | 21 kg |
Width (Metric) | 372 mm |
Type | Reverse Osmosis Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 330 mm |
Voltage | 230 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Bacterial retention | 99% |
Feed Water Monitoring | Integrated |
Thermo Scientific™ Barnstead™ Nanopure™
This product has been discontinued. For additional information or alternate products please contact your sales representative.
Feedwater Pressure | 100 psig (6.9 bar) |
---|---|
Height (Metric) | 49.5 cm |
Electrical Requirements | 100/240 V 50/60 Hz |
Phase | Single |
Width (English) | 13.5 in. |
Length (Metric) | 44.5 cm |
Resistivity | 18.2 Mohm.cm |
Feedwater Temperature (English) | 40°F to 104°F |
Length (English) | 17.5 in. |
Conductivity | 0.055 µS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Pretreated |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 34.3 cm |
Flow Rate | Up to 2 L/hr. |
Dimensions (L x W x H) | 17.5 x 13.5 x 19.5 in. (44.5 x 34.3 x 49.5 cm) |
Product Water Type | Type 1 |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Feedwater Temperature (Metric) | 4°C to 40°C |
Certifications/Compliance | Produces water that exceeds ASTM™, ISO 3696 and CLSI-CLRW Type I water requirements. CE, CSA |
Bacterial Content | <1 CFU/mL |
Height (English) | 19.5 in. |
Feed Water Monitoring | No |
Thermo Scientific™ Barnstead™ Smart2Pure™ Pro Water Purification System
All in One ! The Smart2Pure™ Pro system is a compact system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water.
Operating Pressure | 1 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 545 mm |
Electrical Requirements | 100/240 V 50/60 Hz |
Permeate performance | 16 L/hr. at 10°C |
RO Flow Rate | 16 L/hr. |
Conductivity | Type 1: 0.055μS/cm and Type II: 0.067 to 0.1μS/cm |
Particles >0.2µM/mL | <1 |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 305 mm |
Total Organic Carbon | 1 to 5 ppb |
Flow Rate | Up to 1 L/min. |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT and 1/2 in. NPT |
Depth (Metric) | 300 mm |
Product Water Type | Type 1 and 2 |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Power Consumption | 0.12 kW |
Bacterial Content | <0.01 CFU/mL |
Bacterial retention | 0.99 |
Weight (Metric) | 22 kg |
Feed Water Monitoring | No |